How to control the cycle?

Henkelman control systems

Technology_Control Systems_2800x2200.jpg
By time, percentage or boiling point

Control the packaging cycle

Control of the vacuum packaging cycle is crucial to obtain an optimal and deep end vacuum. Henkelman technology enables you to control the vacuum packaging cycle in 3 different ways: by time in seconds, by a sensor that detects the pre-set percentage of end vacuum, and by a liquid sensor that detects the damp that evaporates when liquids start boiling.

Refer to_Time control.png
In seconds

Time Control

Set the time of the vacuum packaging cycle and the machine stops extracting air as soon as the pre-set time has been reached. Perfect for your basic but professional packaging needs. Only available on Henkelman's Jumbo series.

See all Jumbo models
In percentage (%)

Sensor control

Do you prefer the machine to detect a certain level of end vacuum in the chamber? With Sensor control, the machine automatically stops extracting air as soon as the pre-set vacuum percentage has been detected. Standard on Henkelman's Boxer, Lynx and Marlin series.

Watch video
Refer to_Sensor control.png
Refer to_Liquid control.png
Detection of damp

Liquid control

Wet and liquid products quickly reach their boiling point during the vacuum packaging cycle. Reducing the container pressure below atmospheric pressure, causes fluids to boil at room temperature and cooks products when cold. The Liquid control sensor detects the evaporation of the liquid product. The machine stops extracing the air and starts the sealing of the pouch to prevent damage to product and machine. Liquid control is available as an option on Henkelman's Boxer, Lynx and Marlin series.

  • Not available on Jumbo models
Watch video
Choosing your control panel

Control panels

Customize your packaging process by choosing the control panel that meets all your requirements. Henkelman offers 4 different control panels, each with its own standard features and options. 

Choose your control panel